Sintech PABX Programming code:
To enable co1, co2, and co3
To enable co 1: PABX Programming for one (1) Line: **011234# *6000# *31# *111# *21# *814# – Finished
To enable co 1,2: PABX Programming for one (2) Line: **011234# *6000# *312# *111# *121# *21# *814# – Finished
To enable co 1,2,3:PABX Programming for one (2) Line: **011234# *6000# *3123# *111# *121# *131# *21# g*814# – Finished
Busy Forward: *#0802 if line 1 is busy outside line calls into 802 extension
For extension calling: *ext. no. (*805)
To pick up outside phone from any extension, *#7
To Dial outside by particular co dial *#1 for co1, *#2 for co2, *#3 for co3
To transfer call to another extension, press flash and dial the extension.
To select which co-line should be selected for which extensions:
**011234# *42 – co line – Ext # [**011234# *42 – 2 – 802#]: by doing this, 802 dial out using the CO2 phone line
co line open or lock code:**011234# *3 co1 co2 co3 co4 # [**011234# 1 2 3 4#]
Ring Setting: **011234# *1 – co line – Ext. no [**011234# *1 *1 801#] for co1 outside ring into ext1]
Ring Setting: **011234# *1 – co line – Ext. no [**011234# *1 *2 801#] for co2 outside ring into ext1]
outside line block for certain ext.: [**011234# *51 ext. no. 6# to lock] [**011234# *51 ext. no. 1# to open]
[**011234# *51 803 6# to lock][**011234# *51 803 1# to open]
to change extension no. by default: 801, 802, 802,803….816 if you want to change it into 101, 102 , 103 and so on, to do this
[**011234# *72 1 3 # – *7 001 101# *7 002 102, 87 003 103, and so on] for 101, 102 , 103, and so on
[**011234# *72 2 3 # – *7 001 201# *7 002 202, 87 003 203, and so on] for 201, 202, 203, and so on
other method
[**011234# *7 *7 801 101#, *7 802 102, and so on ]
how to dial out by pressing ‘0’ and the direct extension
[**011234# *8 -ext.no 0 #] for 0 dialing
[**011234# *8 -ext.no 01 #] for direct dialing, do this for all extensions
Miracall PABX Programming code:
1. Factory Reset: **002008# *9000#
2. Master Factory Reset: *020808#
3. DEFAULT Password : **002008#
4. #7 is used to receive extension ringing.
5. #9 is used to receive Phone ringing in other extensions.
6. Do Not Disturb —> #*71
Cancel—> #*70
7. intercom मात्र गर्न दिने तर बाहिर call गर्न नदिने (**002008# *61 ABCD 0#) – ABCD is Extension Number like 8008
(**002008# *61 ABCD 2#) – to open or Cancel
8. DISA—to Record Voice
**002008# *121#—> to start Voice Recording, hook off after completing record
**002008# *131#—> to listen the recorded Voice
to Activate DISA—> **002008# *10#
to De-Activate Disa—> **002008# *11#
9. Conference Meets (2 or more simultaneously)
Pick up the ringing phone coming from outside—flash *Extension (Flash*8005)
Forward calls to a particular extension (e.g., #*2 Ext. No.): (#*2 8008)
to cancel: #*200
10. Forward on Busy: #*1 Extension No (#*1 8008)
to cancel: #*100
11. To set ‘0’ or ‘9’ dial-out code (**002008# *030490#) for 9
(**002008# *030400#) for 0
12. To change the Default Extension number
(**002008# *52 2 3#)—where *52 is the extension change Code , 2 is the extension starting number like 201, 202 etc and 3 is the total number of Digit like 3 Digit 201 is a 3-digit number, 202 is 3-digit number)
Again, type *5 011 202 (*5 is the code, and 011 is 8011 to 202 extension number)
Miracall WS 824 456 PABX
Outgoing Dial: Dial 9
Reception
Code: Dial 0
Call
Transfer: Press “TRF” Key on Key Phone
Call
Pickup: ##40 OR *40
Program
Setting:
–
Press
FNC Key 3 times.
–
Input
System Code 1967590
–
Input
code 01 to 29
–
Auto Ringing 801 to 856
Reset Code:
–
Press
FNC Key 3 times.
–
Input
SYS Code 1967590
–
Input
Code 28
–
System
Reset
–
1/2/0
Press 2
Extension
No. Change:
–
Press
FNC Key 3 times.
–
Input
SYS Code 1967590
–
Input
code 29
–
001-101,
002-102
Outgoing
Block:
–
Input
SYS Code 1967590
–
Input
code 14
–
001-66,
002-66
To Open
Block:
–
001-11,
002-11
Message
Record:
–
##7851#
Record
–
##7881#
to play
–
Pickup
Handset
Input ##7851#
